Tactile Switch 2PIN 6x6x8 Red IRON

Tactile Switch 2PIN 6x6x8 Red – Iron Contact | Momentary Push Button Switch

The Tactile Switch 2PIN 6x6x8 Red Iron is a compact, through-hole momentary push button switch designed for reliable performance in PCB-based electronics. With a 6mm × 6mm base footprint and an 8mm actuator height, this red-capped tact switch provides crisp tactile feedback and is built with iron contacts for cost-effective, high-volume applications.

Whether you’re building an Arduino project, a consumer electronics prototype, or an OEM control panel, this switch delivers the dependable momentary actuation you need.

Key Features

• Pin Configuration: 2-Pin through-hole design
• Dimensions: 6mm (L) × 6mm (W) × 8mm (H)
• Contact Material: Iron
• Cap Color: Red
• Switch Type: Momentary (normally open)
• Electrical Rating: 12V DC, 50mA
• Contact Resistance: 100mΩ max
• Insulation Resistance: 100MΩ min (at 100V DC)
• Operating Life: 100,000 cycles minimum
• Actuation: Tactile dome contact with audible/tactile click feedback
• Mounting: PCB through-hole / breadboard compatible

Technical Specifications

Applications

This tactile switch is widely used in: Arduino & Raspberry Pi projects, reset and power buttons on PCBs, consumer electronics (remote controls, calculators), robotics and automation systems, household appliances, industrial control panels, DIY electronics and prototyping, and educational electronics kits.

Why Choose Iron Contact Over Copper?

Iron contact tactile switches are the go-to choice for budget-conscious builders and high-volume OEM manufacturers. They offer solid conductivity for low-voltage DC circuits (≤12V, ≤50mA) at a lower per-unit cost than copper variants, making them ideal for large-batch production runs where copper’s performance advantage is not required.

Frequently Asked Questions

Q: Is this switch normally open or normally closed? Normally open. The circuit completes only when the button is pressed and returns to open state upon release.

Q: Can I use this on a breadboard? Yes. The 2-pin through-hole design is fully breadboard compatible for prototyping.

Q: What is the difference between Iron and Copper contact? Copper offers lower resistance and longer life, but iron is cost-effective for standard low-voltage applications. For projects rated under 12V/50mA, iron contact performs reliably.

Q: Is bulk pricing available? Yes. Contact us for bulk/OEM pricing with GST invoice.